Woodworking engraving machine

The way of woodworking engraving machine is different, and the engraving situation is different. Then, what methods can we use in the process of use? Below, Shandong engraving machine manufacturers introduce the way of lathe of woodworking engraving machine:

1. Oblique. When the knife is dropped in this way, the engraving tool does not fall vertically, but falls obliquely at a certain angle. This can avoid material breakage caused by excessive impact when engraving, and also reduce The knife marks left on the engraving surface.

2. Cut-in type. When the knife falls, the tool enters the tool from the side of the starting point of the engraving path to the machining depth, and then cuts to the starting point of the path according to the setting of the arc radius or the line length parameter. It is guaranteed that there will be no traces of woodworking machine knives left on the engraving surface.

3. Progressive. When the knife falls, the tool does not fall directly to the set engraving depth, but descends to a certain depth during the falling process, lifting the tool and then descending to a certain depth until it falls to the set depth position. The lower knife can avoid the damage of the material or the deformation of the tool or even the broken knife due to excessive impact when the material with high hardness is engraved.

How does the woodworking engraving machine maintain the knives?

    When the engraving machine is engraving, each part has its own function and function, and the most important thing is to engrave the knife. The carving knife of the woodworking engraving machine, when used, although the loss is relatively small, but it also has certain damage. Therefore, how to maintain the knife becomes more important. After all, if the engraving machine of a engraving machine is well maintained, the engraving machine can be used for a long time. Today, Xiaobian will take you to see how to maintain the carving knife of the engraving machine.
    First of all, the woodworking engraving machine manufacturer reminds everyone here that when carving wood, it is necessary to adjust the rotation speed of the engraving machine. It is not a kind of speed that will adapt to all wood carvings. Therefore, depending on the material of the wood, the precision of the carving is different to adjust the rotation speed of the knife. Sometimes, if the speed of the knife is too large, it is easy to break the knife.
    In addition to adjusting the speed is to pay attention to when using, after use, it is necessary to clean the engraving machine in time. If the knife has a sawdust on the hand, it should be cleaned up in time, otherwise it will affect the rotation of the engraving machine. In addition, after using the engraving machine for a period of time, remember to polish it. Otherwise, the knife will slowly become dull and the engraving effect will become worse. But the frequency of polishing does not need to be too frequent.