The way of woodworking engraving machine is different, and the engraving situation is different. Then, what methods can we use in the process of use? Below, Shandong engraving machine manufacturers introduce the way of lathe of woodworking engraving machine:
1. Oblique. When the knife is dropped in this way, the engraving tool does not fall vertically, but falls obliquely at a certain angle. This can avoid material breakage caused by excessive impact when engraving, and also reduce The knife marks left on the engraving surface.
2. Cut-in type. When the knife falls, the tool enters the tool from the side of the starting point of the engraving path to the machining depth, and then cuts to the starting point of the path according to the setting of the arc radius or the line length parameter. It is guaranteed that there will be no traces of woodworking machine knives left on the engraving surface.
3. Progressive. When the knife falls, the tool does not fall directly to the set engraving depth, but descends to a certain depth during the falling process, lifting the tool and then descending to a certain depth until it falls to the set depth position. The lower knife can avoid the damage of the material or the deformation of the tool or even the broken knife due to excessive impact when the material with high hardness is engraved.
