How to use advertising engraving machine?

1. Fix the material to be engraved on the engraving machine, and use screws and press buttons. Note: Try to make the horizontal and vertical directions perpendicular to the horizontal and vertical directions of the engraving machine.

2, install the milling cutter

3, open the operating system of the engraving machine (here, Weihong system as an example)

4. Load the engraving file that needs to be engraved (file type is NC)

5, a very important step! Set the origin: turn on the engraving machine power, turn on the spindle rotation, then click the manual button, first set the Z axis, click the Z- button to make the milling cutter and the engraving machine table height 0, and then click the number behind the workpiece coordinate Z to make It is 0. Then set the X-axis and Y-axis origins, click on X+X-Y+Y- to position the cutter in the lower left corner of the material to be machined, and then click on the number behind the XY at the workpiece coordinates to make them all zero. Setting the coordinate origin is complete!

6, simulation. Click the emulation button (shortcut F8) to see if the engraving path is correct. If there is no error, click the emulation button again to cancel the simulation.

7, start. Everything is ready, click on the start button (shortcut F9) to start the engraving. The speed of the engraving is adjusted according to the hardness of the engraving material.

8. Suspension. If the milling cutter breaks or other unexpected situations occur during the engraving process, press the pause button (shortcut F10)

What are the precautions for using the advertising engraving machine?

1. During the operation of the advertising engraving machine, the machine head rotates at high speed. Do not touch the machine head and milling cutter with your hands.

2, the advertising engraving machine will produce high temperature for a long time working machine head, so the advertising engraving machine must open the cooling circulating water when working, otherwise the machine head will burn out, causing unnecessary economic loss.

How to use the tips of the advertising engraving machine?

First, since the advertising engraving machine is often equipped with multifunctional pliers or chucks, and they are made of iron, it is easy to damage the engraved objects or cause them to slip during the engraving process. Then use some rubber caps or rubber. It is helpful to use the tube for the fixation of the engraved object.

Secondly, when engraving the plastic pattern on the advertising engraving machine, the transfer tape can be attached to the back side of the engraved object, and the tape-coated side is sprayed with the liquid spray glue, and then attached to a surface which can be discarded. This avoids the use of double-sided tape, leaving a surface that is difficult to clean. Because the transfer tape is easy to peel and clean. Using a special engraved tape, the side of the tape is more viscous than the other side, so the plate can be moved at will. .

Third, for those irregularly shaped engraved objects, the surface seems to have been fixed very tightly, and when it is under pressure, it will also sway back and forth. At this time, you can try to put some scrap under the object to increase friction. The other is to keep the package that comes with the item. Although the object is irregularly shaped, the package itself may be very regular and easy to be fixed, plus a small strip of irregularly shaped objects. It is easy to fix. Or try to fix its regular parts and discard its irregular parts.

Fourth, if the downforce to be engraved is large, consider whether you must use a cone-shaped nose. If the pressure of the diamond engraving machine in the engraving process is too large, the pressure on the side of the tool will cause The movement of the engraving. If an incorrect diamond knife is used, it will also cause the same problem. A 90 or 100 degree diamond knife will penetrate the material and move the material during the engraving process.