Today, we will talk about how the woodworking engraving machine can not be damaged by the knife. This topic, if you want to know the friends, then let me follow the small series now.
At the beginning is the parameter setting problem. The time when the carpenter engraving machine is positioned in the Z axis is not to let the knife meet the data surface, but to remove the data so that the knife directly encounters the table. It can be encountered, not deep, in this place. The Z axis is first zeroed, and then the cutting depth set in Venter is at the corresponding height, and then the Z axis is zeroed. This is the origin of the Z axis. According to the depth of the setting of Wentai, the lowest point of the engraving machine is the first place where our door is zeroed. It is just below the table, so that the data is completely engraved and will not hurt the engraving machine.
Secondly, it is better to add a cover plate on the surface of the engraving machine. For example, the carpenter engraving machine with vacuum suction table can put a thin Ozon plate on the table. The looseness of the Ozon plate itself will not affect the vacuum adsorption, and it can effectively prevent it. A tool that is not allowed to be formed at the origin setting has a problem with the table.
The surface of the carpenter's engraving machine can be scratched in the application even if it is done in the temporary application. This time, it is necessary to use the new milling platform. When the electric board or PVC on the table is too thin, it can You can build a new layer. What needs to be noticed is that in the time of the factory, in order to prevent damage to the countertop during the logistics and transportation, the normal city needs the time for the after-sales staff to debug the door from the new milling platform.
