How to do the rust of the woodworking machine spindle motor?

The rust of the woodworking engraving machine spindle is a problem that plagues many users. Because of the working environment, if the maintenance is not timely, the spindle motor is easy to rust, and slight rust does not affect the normal use of the spindle motor, but if it is not handled for a long time, the life of the spindle motor will be shortened. Woodworking engraving machine spindle motor rust removal method:
First, by hand knocking, shovel, scraping, brushing, sand or flexible frustration to eliminate the appearance of scale, scale, etc., this is the painter radical derusting method, you can also use a blade, scraper, pointed hammer, wire brush , abrasive cloth, broken saw blade and other tools, this method is relatively simple, but it is also easy to damage the machine. Maintenance personnel need to be very careful when removing rust. It is easy to cause the machine spindle to deviate from the track without paying attention.
Second, use a clean lubricant, evenly sprayed on the motor, about half an hour you can use a cotton cloth to wipe off the rust on the stone engraving machine, if the rust is severe, you can spray a few times more lubricant. Lubricating cleaners are non-conductive and have good lubrication.

Woodworking engraving machine 3D clearing tips How to use 3D clearing angle for woodworking engraving machine

Nowadays, the technique of carving and engraving machine will always use three-dimensional clearing techniques. This technique will make the engraving effect better, and the engraving effect is more artistic and three-dimensional. However, to achieve the application of this technology requires a certain level of engraving and the experience of woodworking engraving machine, it is necessary to set different engraving processes according to different needs. Next, follow the CNC network Xiaobian to learn about the three-dimensional cornering skills of woodworking engraving machine. How to use the three-dimensional clear angle of woodworking engraving machine!
There are two main processing methods for the processing of “island” by CNC engraving machine engraving software: island processing and continuous engraving. The so-called island processing is to process the unprocessed areas mentioned above by milling. When clearing the milling bottom, its "overlap percentage" should be defined.
The continuous engraving method refers to continuing the three-dimensional processing by using the above-mentioned area that is flattened as a plane as an initial plane. Thus the actual engraving depth may be greater than the designed depth, but it cannot exceed the height of the blade plus the shank. When processing, the angle of the picking angle and the angle of the picking angle can be modified as appropriate. When machining larger objects or using thicker tools, the picking distance can be increased accordingly. Normally, it is recommended to use the default value of 0.1 mm. The angle of the pick-up angle is too small, which may cause too many corners and affect the actual processing effect of the engraving machine.
1) The depth range must be the same as the depth range in the rough engraving of the area, otherwise the clear angle will be incomplete or the bottom surface will be cut; 2) The engraving allowance can only be less than or equal to the engraving margin in the rough engraving of the area, otherwise the clear angle processing Excessive residual material will be left; 3) The side angle can only be less than or equal to the same side angle in the rough engraving of the area. When it is smaller than the side angle in the rough carving, the system will calculate according to the angle of the selected tool, which is larger than the area. When the side angle is engraved, the side angle is greater than the angle of the side in the rough engraving of the area; 4) The angle of the sharpening tool must be the same as the angle of the tool used in the rough engraving of the area.
In short, whether it is the engraving machine for three-dimensional clear angle processing, or other engraving process, the operator needs to be more skilled in the use process, and master some related engraving processing skills, can better play the performance of the CNC engraving machine.